This amine cured epoxy coating provides a very tough seamless coating system for high abuse areas. It is an excellent coating for areas requiring protection against the growth of mold, mildew, fungus and bacteria. The unique hybrid binder in Steri-Coat P provides high film integrity, and good chemical resistance required for prolonged substrate protection.
Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]
Systems:
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. (Compliance Certificates Available Upon Request)
- Meets SCAQMD Rule 1113 for VOC content
- Low emitting material
- Low installation odor
- Good Chemical & Abrasion Resistance
- USDA & FDA Compliant
- Anti-Microbial Agents are available as an option
Color:
- Standard colors
- Color Chart available upon request.
- Custom Colors Available, consult Dudick for complete information.
Finish:
- Gloss
Primer:
- Primer 67, Primer 67LV or others as recommended by Dudick.
- Other epoxy basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.
Dry Film Thickness:
- 6 – 8 mils (152 – 203 microns) per coat
- For best results, a total dry film thickness of 12 to 16 mils (305-406 microns) is recommended. The best results are achieved with one primer coat and two finish coats.
Typical Uses:
- Clean Rooms
- Food & Beverage Processing Facilities
- Commercial Kitchens
- Warehouses/Storage Areas
- Manufacturing & Waste Water Treatment Plants
- Maintenance Garages
- Pharmaceutical & Research Facilities
- Health Care Facilities
- Restrooms and Shower Areas
- Animal Housing and Research Labs
Solids Content:
- By Volume 91% +/- 1%
Theoretical Coverage Rate:
- 1,460 ft²/gal at 1.0 mils (35.8 m²/l at 25 microns)
- 243 ft²/gal at 6.0 mils (6.0 m²/l at 150 microns)
- 182 ft²/gal at 8.0 mils (4.5 m²/l at 200 microns)
- Allow for loss in mixing and application.
VOC Values:
- As Supplied: <10 g/L
Chemical Resistance Tables:
- Dilute Inorganic Acids
- Aliphatic Hydrocarbons
- Sodium Hydroxide
- Salt & Brine Solutions
- Mineral Oils
Topcoats:
- Topcoats are optional and selection will depend on exposure.
- Contact Dudick for recommendations.
