A high solids epoxy primer for concrete that has previously been exposed to oils, grease, or fats. Specially designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.

Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]

Features:

• Meets most VOC Requirements
• Low Odor
• User Friendly
• Increases adhesion to oil saturated concrete that has been surface cleaned

Color:

• Translucent Grey

Dry Film Thickness:

• 4 – 6 mils (102 – 152 microns) per coat

Typical Uses:

• Primer for epoxy and urethane systems on concrete and other porous substrates

Solids Content:

• By Volume: 100%

Theoretical Coverage Rate:

• 1,604 ft²/gal at 1.0 mils (39.4 m²/l at 25 microns)
• 401 ft²/gal at 4.0 mils (9.8 m²/l at 100 microns)
• 267 ft²/gal at 6.0 mils (6.6 m²/l at 150 microns)
• Allow for loss in mixing and application.

VOC Values:

• As supplied: 0.08 lbs/gal (10 g/L)

Topcoats:

• Topcoat selection will depend on exposure
• Contact Dudick for recommendations.