A high solids epoxy primer for steel and concrete. Designed to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.

Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]

Features:

• Low VOC
• Low Odor
• Meets CDPH standard method version 1.2 test for low cured VOC’s
• Compliant with LEED 4.1
• Meets SCAQMD Rule 1113 for VOC content
• Tolerant to moisture vapor transmission (<5 lbs per 1000 ft²)

Color:

• Clear

Dry Film Thickness:

• 3 – 4 mils (76 – 102 microns) DFT

Typical Uses:

• Primer for epoxy and urethane systems

Solids Content:

• 95%

VOC Values:

• As Supplied: 30-35 g/L

Topcoats:

• Topcoat selection will depend on exposure
• Contact Dudick for recommendations.

Application:

• For maximum performance, all steel surfaces should be primed. Contact a Dudick representative for system recommendations.
• Concrete, however, must always be primed to aid in the “wetting out” required for good adhesion.