A multi-component, aliphatic polyurethane coating. Sealer 35 offers the outstanding color stability and resistance to UV degradation known industry wide to be inherent of aliphatic urethane chemistry. Toughness, impact resistance, and stain resistance are inherent qualities of this topcoat.
Technical Data Sheet | Safety Data Sheet [Part A] | Safety Data Sheet [Part B]
Features:
- High Solids
- Excellent Color Stability
- Good Stain Resistance
- VOC Compliant
- Low Odor
- High Wear Filler may be incorporated for increased abrasion resistance
Color:
- Clear or can be pigmented with Universal Color Packs
- Color Chart available upon request.
Finish:
- Gloss
- When using High Wear Filler the finish will be reduced to a semi-gloss-satin sheen depending on the amount added.
Primer:
- Applied as a topcoat for Steri-series epoxies.
- Other epoxy basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.
Dry Film Thickness:
- 3 – 4 mils (76 – 102 microns) DFT
- Do not exceed 6 mils wet.
Typical Uses:
- Clean Rooms
- EV Battery Production
- Warehouse Floors
- Airplane Hangars
- General maintenance
Solids Content:
- By Volume: 90% +/- 3%>/li>
VOC Values:
- As Supplied: 173 g/L
Chemical Resistance:
- n-Methylpyrrolidone(NMP)
- Betadine
- Beer
- Brake Fluid
- Citric Acid
- Iodine
- Water
- Solvents
- Sodium Hydroxide – 50%
- Sulfuric Acid – 20%
- Dilute Organic/Inorganic Acids
- Oils
- Gasoline
- Jet Fuel
