Shock-Crete® TCUV

Shock-Crete TCUV is a high performance, UV stable, semi-gloss topcoat for cementitious urethane floor systems. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms.

Technical Data Sheet | Safety Data Sheet [Part A] | Safety Data Sheet [Part B] | Safety Data Sheet [Filler]

Features:

  • UV stable
  • Excellent chemical resistance
  • High abrasion resistance
  • Resistant to thermal shock
  • Excellent resistance to MVT (moisture vapor transmission)
  • Withstands mechanical stress
  • Ultra low VOC
  • Suitable for use in USDA inspected facilities.

Color:

  • Stocked Colors: Red (Q501), Mid Gray (Q703), Cream (Q202), Dark Gray (Q704), Tan (Q204), Khaki (Q205), Green (Q302), and Safety Yellow (Q603), and Black (Q900).
  • Note: When applying at less than 12 mils, it may be necessary to add 2 pigment packs for full opacity.

Finish:

  • Semi-Gloss

Typical Uses:

  • Used as a topcoat for Shock-Crete systems where UV stability, MVT resistance, and chemical resistance is desired.

Recommended Thickness:

  • 12 mils (300 microns)
  • Do not apply at less than 5 mils (127 microns)

Coverage Rate:

  • Approximately 290 ft² (88.4 m²) per 2.2 gallon unit
  • Approximately 230 ft² (70 m²) as a grout coat over broadcast floors per 2.2 gallon unit

VOC Values:

  • As supplied: 0.04 lbs/gal (5 g/L)

Density:

  • Approximately 11.5 lbs/gallon (1.38 kg/L)