Cementitious cove base mortar that provides a durable finish for use with Shock-Crete flooring systems. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.
Technical Data Sheet | Safety Data Sheet [Part A] | Safety Data Sheet [Part B] | Safety Data Sheet [Filler]
Features:
- Excellent chemical resistance
- Withstands high mechanical stress
- High abrasion resistance
- Easy to clean and sterilize surface
- Resistant to thermal shock
- Resistant to steam cleaning
- Ultra low VOC/odor
- Suitable for use in USDA inspected facilities
Color:
- Stocked Colors: Red (Q501), Mid Gray (Q703)
- Made to Order Colors: Cream (Q202), Tan (Q204), Khaki (Q205), Green (Q302), Safety Yellow (Q603) and Dark Gray (Q704)
Finish:
- Matte
Primer:
- Steri-Prime, Primer 67LV, a mixture of neat Shock-Crete resin or as recommended by your Dudick representative
Typical Uses:
- Provides a heavy duty, thermal shock resistant and hygienic seal at the joint between the floor and the wall. Can be used to enhance Shock-Crete or Steri-Series flooring systems.
Recommended Thickness:
- 1/8-3/16″ (0.32-0.48 cm)
Solid(s) Content:
- 99.9% solids by volume
- As supplied 0.04 lb./gal. (5 g/L)
Coverage Rate:
- 16 ft² (1.5 m²)/ or 48 linear ft (14.6 m)/ at 4″ (10.2 cm) high at 1/8″ (0.32 cm)
- 11 ft² (1.0 m²)/ or 33 linear ft (14.6 m)/ at 4″ (10.2 cm) high at 3/16″ (0.48 cm)
VOC Values:
- As Supplied: 0.04 lbs/gal (5 g/L)
Dry Temp. Resistance:
- Continuous: 220°F (104°C)
- Non-Continuous: 250°F (121°C)
Limitations:
- Shock-Crete Vertical may change color over time depending on exposure to UV light and heat. This does not compromise the product’s chemical resistance or physical characteristics.
Topcoats:
- Shock-Crete Topcoat, Shock-Crete TCUV, Sealer 70 or as recommended by your Dudick representative.
