Steri-Flor® GP

Steri-Flor GP is a self-leveling epoxy applied to achieve a strongly bonded monolithic topping with moderate chemical resistance and good physical and mechanical properties.

Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]

Features:

  • Contributes toward satisfying credit for low emitting material under LEED 4.1
  • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. (Compliance certification available upon request)
  • Meets SCAQMD Rule 1113 for VOC content
  • Contains 15% post industrial recycled product
  • Low VOCs
  • Low installation odor
  • Can be seeded for anti-skid surface
  • Stain resistance with excellent cleanability
  • Can be reinforced with fiberglass to increase crack bridging properties
  • USDA compliant

Color:

  • Standard colors
  • Color Chart available upon request.

Finish:

  • Gloss

Primer:

  • Steri-Prime, Steri-Prime DTO, Primer 67LV or others as recommended by Dudick.

Dry Film Thickness:

  • 10 – 40 mils (254 – 1016 microns) DFT
  • Greater thicknesses can be achieved with aggregate reinforcement. Contact Dudick for recommendations.

Typical Uses:

  • Food processing floors
  • Laboratories
  • Pharmaceutical plants
  • Wastewater treatment facilities
  • Aisleways
  • Printed circuit board facilities

Solids Content:

  • By Volume: 100%

Theoretical Coverage Rate:

  • 1,604 ft²/gal at 1.0 mils (39.4 m²/l at 25 microns)
  • 160 ft²/gal at 10.0 mils (3.9 m²/l at 250 microns)
  • 40 ft²/gal at 40.0 mils (1.0 m²/l at 1000 microns)
  • Allow for loss in mixing and application.

VOC Values:

  • As Supplied: 4 g/L

Limitations:

  • For interior use only

Chemical Resistance Tables:

  • Dilute inorganic acids
  • Dilute alkali solutions
  • Cleaning & sanitizing solutions
  • Mineral oils
  • Salt solutions

Topcoats:

  • Optional topcoats available depending on exposure, desired UV stability, and durability requirements.
  • Contact Dudick for recommendations.