Easy to apply highly functional slurry-broadcast base layer for use in cementitious urethane flooring systems (3/16-1/4″ / 0.48-0.64 cm). Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.
Technical Data Sheet | System Information Sheet | Safety Data Sheet [Part A] | Safety Data Sheet [Part B] | Safety Data Sheet [Filler]
Features:
- Unaffected by MVT (moisture vapor transmission)
- Excellent chemical resistance
- High abrasion resistance
- Resistant to thermal shock
- Withstands higher mechanical stress
- Easy to clean and sterilize surface
- Resistant to steam cleaning
- Positive slip resistance
- May be applied to “green” concrete
- Ultra low VOC/odor
- Suitable for use in USDA inspected facilities
Color:
- Stocked Colors: Red (Q501), Mid Gray (Q703), Cream (Q202), Dark Gray (Q704), Tan (Q204), Khaki (Q205), Green (Q302), and Safety Yellow (Q603), and Black (Q900).
Finish:
- Matte
Primer:
- Self Priming
Typical Uses:
- General concrete restoration
- Breweries and beverage plants
- Food manufacturing
- Food preparation areas
- Chemical processing plants
- Laboratories
Recommended Thickness:
- 3/16-1/4″ (0.48-0.635 cm)
Coverage Rate:
- 24 ft² (2.2 m²)/ single pack unit at 3/16″ (0.48 cm) (yielding 1/4″/0.64 cm finished floor)
- 18 ft² (1.7 m²)/ single pack unit at 1/4″ (0.64 cm)(yielding 5/16″/0.79 cm finished floor)
VOC Values:
- As supplied: 0.04 lbs/gal (5 g/L)
Dry Temp. Resistance:
- Continuous: 200°F (93°C)
- Non-Continuous: 250°F (121°C)
Limitations:
- Shock-Crete SR may change color over time depending on exposure to UV light and heat. This does not compromise the product’s chemical resistance or physical characteristics.
Topcoats:
- Shock-Crete Topcoat, Shock-Crete TCUV, Sealer 985, Sealer 30 or as or as recommended by Dudick.
