Steri-Coat 200

Steri-Coat 200 offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration and staining.

Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]

Features:

  • Class A Fire Rating
  • Meets SCAQMD Rule 1113 for VOC content
  • Low odor
  • Low VOCs
  • Excellent adhesion
  • Excellent chemical & abrasion resistance
  • Excellent stain resistance
  • Anti-Microbial Agents are available as an option
  • Soap & water clean up
  • Also available in satin

Color:

  • Standard color chart available upon request.

Finish:

  • Gloss or Satin

Primer:

  • Dudick Primer 200WB
  • Other epoxy basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.

Dry Film Thickness:

  • 3 – 4 mils (76 – 102 microns) per coat
  • Multiple coats may be required depending on color selection and substrate.

Typical Uses:

  • Research Facilities
  • Laboratories
  • Food & Beverage Facilities
  • Hospitals
  • High Containment Bio-Safety Research Lab (BSL) 1-3

Solids Content:

  • By Volume 50% +/- 2%

Theoretical Coverage Rate:

  • 802 ft²/gal at 1.0 mils (19.7 m²/l at 25 microns)
  • 267 ft²/gal at 3.0 mils (6.6 m²/l at 75 microns)
  • 200 ft²/gal at 4.0 mils (4.9 m²/l at 100 microns)
  • Allow for loss in mixing and application.

VOC Values:

  • As Supplied: <50 g/L