Sealer 30 Clear Gloss

A two-component, ASTM Type V, aliphatic polyurethane coating. Sealer 30 offers the outstanding color stability and resistance to UV degradation known industry wide to be inherent of aliphatic urethane chemistry. Toughness, impact resistance, and stain resistance are inherent qualities of this topcoat.

Features:

  • Contributes toward satisfying credit for low emitting material under LEED 4.1
  • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017 (Compliance Certificates Available Upon Request)
  • Meets SCAQMD Rule 1113 for VOC content
  • High Solids
  • Excellent Color Stability
  • Good Stain Resistance
  • VOC Compliant
  • Also available in Satin finish

Color:

  • Clear and standard colors
  • Color Chart available upon request

Finish:

  • Gloss

Primer:

  • Primer 67, Primer 67LV or others as recommended by Dudick.
  • Other epoxy basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.

Dry Film Thickness:

  • 4 – 5 mils (102 – 127 microns) DFT

Typical Uses:

  • Clean Rooms
  • Warehouse
  • Floors
  • Airplane Hangars
  • General maintenance

Solids Content:

  • By Volume 78%

Theoretical Coverage Rate:

  • 1,251 ft²/gal at 1.0 mils (30.7 m²/l at 25 microns)
  • 313 ft²/gal at 4.0 mils (7.7 m²/l at 100 microns)
  • 250 ft²/gal at 5.0 mils (6.1 m²/l at 125 microns)
  • Allow for loss in mixing and application.

VOC Values:

  • As Supplied: <20 g/L

Chemical Resistance Tables:

  • Water
  • Solvents
  • Sodium Hydroxide – 50%
  • Dilute Organic/Inorganic Acids
  • Oils
  • Gasoline
  • Jet Fuel

Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]