Showing 101–110 of 113 results
-
Features:
- Zero VOCs
- Low installation odor
- Can be broadcasted for anti-skid surface
- Stain resistance with excellent cleanability
- Can be reinforced with fiberglass to increase crack bridging properties
- USDA compliant
- MMA Alternative
Description:
Steri-Flor CT is a self-leveling epoxy and binder resin designed for rapid return to service that creates a strongly bonded monolithic coating with moderate chemical resistance and good physical properties.
-
Features:
Description:
This fast-curing epoxy mortar is designed for easy application even in low temperature environments.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance certification available upon request.
- Meets SCAQMD Rule 1113 for VOC content
- Contains 15% post industrial recycled product
- Low VOCs
- Low installation odor
- Can be seeded for anti-skid surface
- Stain resistance with excellent cleanability
- Can be reinforced with fiberglass to increase crack bridging properties
- USDA compliant
Description:
Steri-Flor GP is a self-leveling epoxy applied to achieve a strongly bonded monolithic topping with moderate chemical resistance and good physical and mechanical properties.
-
Features:
- USDA compliant
- High compressive strength
- Low odor
- Integral cove base and curb (optional)
- Factory engineered aggregate blend for power and hand trowel applications
- Anti-microbial agents are available as an option
- Installed as supplied
- is compliant with California SCAQMD Rule 1113 for VOC content
- Contributes toward satisfying credit MR 5 and EQ 4.2 under LEED
Description:
A heavy-duty epoxy mortar basecoat. The total system provides a strongly bonded monolithic floor with excellent physical and mechanical properties.
-
Features:
- USDA compliant
- Fast recoat time
- Low odor
- Anti-microbial agents are available as an option
- Installed as supplied
- is compliant with California SCAQMD Rule 1113 for VOC content
- Contributes toward satisfying credit MR 5 and EQ 4.2 under LEED
Description:
An epoxy grout used to seal and fill small voids left from troweling the aggregate filled Steri-Flor T, a heavy-duty industrial troweled mortar.
-
Features:
- Meets SCAQMD Rule 1113 for VOC content
- Low viscosity - good wetting properties
- approximately 500 cps mixed.
- Low installation odor
- for use in occupied areas.
- Stain resistance with excellent cleanability
- USDA compliant
Description:
Steri-Flor UV is a multi-functional epoxy floor coating with increased UV stability compared to conventional epoxies. It provides good resistance to common chemicals and daily traffic and may be used as a base/color coat, receiving coat, or grout coat for decorative broadcast floors.
-
Features:
- Meets most VOC Requirements
- Low Odor
- User Friendly
- Tolerant to moisture vapor transmission ( < 5 lbs per 1000 sq.ft.)
Description:
A high solids epoxy primer for concrete. Designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.
-
Features:
- Meets most VOC Requirements
- Distinct
- But Low Odor
- User Friendly
- Increases adhesion to oil saturated concrete that has been surface cleaned.
- Tolerant to moisture vapor transmission ( < 5 lbs per 1000 sq.ft. / < 24.4 sq.g/m.)
Description:
A high solids epoxy primer for concrete that has previously been exposed to oils, grease, or fats. Specially designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.
-
Features:
- Extremely fast recoatability
- Meets even the most restrictive VOC Requirements
- Low/no Odor
- User Friendly
- Unlimited moisture vapor transmission when used within a water-based system
- Can be used if the substrate is saturated surface damp or "SSD"
- Suitable for use in USDA inspected facilities
Description:
A water based epoxy primer for concrete. Designed to increase adhesion and reduce the potential for outgassing in high performance flooring systems.
-
Features:
- Excellent chemical resistance
- Good abrasion resistance
- Can be applied at high film thicknesses to ceilings and walls
- USDA Compliant
- Anti-Microbial Agents are available as an option
- Low emitting material
- Low VOC
- Low installation odor
Description:
A high-solids, multi-functional epoxy coating for walls and ceilings. The unique hybrid binder provides high film integrity, and excellent chemical resistance required for prolonged substrate protection. It can be spray applied to a high film build in one or two coats to achieve a monolithic barrier for protecting substrates in aggressive environments.