Showing 21–30 of 120 results
-
Features:
- Smooth
- slick finish
- Corrosion and galvanic resistant
- Good overall chemical resistance
- High build capabilities
- Zero VOC
- Exceptional adhesion
- Excellent abrasion resistance
Description:
A surface grade, fluid applied epoxy coating used to provide both corrosion and erosion protection for degraded steel substrates. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Smooth
- slick finish
- Corrosion and galvanic resistant
- Good overall chemical resistance
- High build capabilities
- Zero VOC
- Exceptional adhesion
- Excellent abrasion resistance
Description:
A surface grade, fluid applied epoxy coating used to provide both corrosion and abrasion resistance for degraded steel substrates. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Can minimize outgassing on concrete
- Promotes higher adhesion values between the substrate and lining material
- Low viscosity promotes increased wet out of surface
- Long pot life
- Long recoat window (5 days @ 75°F/23°C)
- Primer for polyester and vinyl ester systems
Description:
A primer designed to provide improved adhesion when installing high performance linings over properly prepared concrete and steel. It lowers the chances of outgassing when used over concrete and can be used as a holding primer for abrasive blasted steel.
-
Features:
Description:
Primer 27C is a two-component conductive vinyl ester primer designed to be used over concrete whenever the coating or lining system must be spark tested for pinholes.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Densifies concrete surface
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC, deep penetrating epoxy primer for dense concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. Can be used to densify the surface of concrete.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC epoxy primer for concrete and steel. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids static dissipative epoxy primer for concrete. It is used as part of static dissipative flooring system, intended to dissipate stray electrical current by running excess current to ground. It increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Broad spectrum chemical resistance
- Superior adhesion to metal substrates and concrete
- Blush resistant formulation
- Meets all VOC Requirements
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid
Description:
Protecto-Coat 100XT is a 100% solids, flake-filled, high functionality, novolac epoxy coating. The novolac epoxy binder and overlapping flake fillers in Protecto-Coat 100XT provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.