Showing all 7 results
-
Features:
- State of Florida: Secondary Containment Approval EQ-510
- Long term abrasion and chemical resistance
- Excellent bond strength assures good adhesion
- Factory proportioned packaging ensures consistent high quality and simplified mixing
- VOC Compliant in all U.S. states
Description:
Caulk PSC is a two-component, 100% solids, chemically resistant sealant. It will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. Caulk PSC is to be used as a general purpose expansion joint sealant designed for splash and spill and secondary containment of moderate strength acids, alkalis and some solvents typically found in industrial chemical processing.
-
Features:
Description:
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
Description:
An optional pigmented gel coat that can be applied to the cured Protecto-Flake 800 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent abrasion resistance and hardness
- Low permeability
Description:
An optional pigmented gel coat that can be applied to the cured Protecto-Flake 900 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.
-
Features:
Description:
-
Features:
- Self-leveling
- Ultra low VOC
- Low odor
- Good chemical resistance
- Abrasion resistant
- Solvent free
- Versatile use in epoxy flooring systems
- Seamless and hygienic finish
- Low maintenance
- Nonylphenol free
Description:
Solvent free, self-leveling epoxy that is extremely versatile. Different grades of slip resistance can be achieved by the inclusion of graded aggregates between coats. Excellent receiving coat for flake and quartz epoxy flooring systems.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance Certificates Available Upon Request
- Meets SCAQMD Rule 1113 for VOC content
- Water/Vapor Proofing
- Fast Setting
- VOC Compliant
- Reduces water from 10 lbs./1000 ft² to < 3lbs
- Allows for over coating with epoxies & other polymers
- Non-porous
- Bonds to concrete pH 7-14
- Semi-Self leveling
Description:
An aggregate filled polyurethane moisture control system that develops cure strength approximately 2 times that of the concrete base to which it is applied. The monolithic topping exhibits excellent physical and mechanical strength as well as moisture vapor reduction.