Showing 1–10 of 27 results
-
Features:
- Superior Chemical Resistance
- Outstanding elongation properties
- Excellent bond strength assures good adhesion
- Factory proportioned packaging ensures consistent high quality and simplified mixing
- Long Pot Life
- VOC Compliant in all U.S. states
Description:
Caulk 100XT is a highly flexible, two-component, 100% solids joint sealant with superior chemical resistance. It will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. Caulk 100XT is to be used as a specialty joint sealant designed for environments where resistance to spills of concentrated acids and most solvents is required.
-
Features:
- UV resistance
- Fast installation
- Excellent elongation properties
- 10-20 minute shave time with a long open shaving window.
- Durable
- Cures in temperatures as low as -20°F (-29°C)
- Variety of colors available
- Suitable for use in USDA inspected facilities.
Description:
A UV resistant, 100% solids, two component, heavy duty, semi-rigid polyurea joint sealant designed for filling and protecting control joints and saw cut construction joints in industrial and commercial floors. Developed to fill typical construction joints in order to protect joint edges from spalling and to seal open joints. Using Carboseal Flex Joint will create a longer lasting floor and reduce the areas where bacteria can hide and grow. It has the unique benefit of being able to be shaved within minutes or up to 24 hours later.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids static dissipative epoxy primer for concrete. It is used as part of static dissipative flooring system, intended to dissipate stray electrical current by running excess current to ground. It increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Very good chemical resistance
- Resists repeated cleaning
- Gloss finish for ease of cleaning
- Low odor
- VOC is < 100 g/L
- Fast dry to touch and recoat
- Hard
- tough
- abrasion resistant film
- Suitable for use in USDA inspected facilities
- Breathable for concrete with high moisture vapor transmission
- when used as part of an all waterbased system
Description:
A water-based epoxy finish that is easy to apply and has very good chemical resistance. Sanitile 555 VOC has minimal odor and is less than 100 g/L VOC. It has significant improvements in film hardness and toughness over straight acrylic or acrylic-epoxy coatings and is more chemically and physically resistant. It is therefore ideal for more aggressive exposures on walls and structural components than acrylic-modified epoxies. It may also be used for light to moderate duty floors.
-
Features:
- Field and shop application
- Soap & water clean up
- Low odor
- low VOC’s
- Excellent adhesion
- Excellent chemical & abrasion resistance
- Also available in satin
Description:
A two component waterborne urethane coating that offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration, impact and staining with easy soap and water cleanup.
-
Features:
- Isocyanate free
- Fast cure
- Excellent durability
- Low Dirt Pickup
- Meets IEEE ANSI C57.12.29-2005 Standard For Pad Mounted Equipment
Description:
Sealer 80 is an isocyanate free, ultra-durable, fast-cure coating that provides outstanding color and gloss retention. It combines the chemical resistant properties of epoxies with the weathering characteristics of acrylic-polyurethanes giving it a tightly cross-linked film resulting in a finish with outstanding barrier properties against Vaporized Hydrogen Peroxide.
-
Features:
- Quick return to service (2-4 hours for foot traffic)
- Smooth
- gloss finish
- Flexible with high impact resistance
- Excellent UV protection
- Excellent chemical and abrasion resistance
- Extended pot-life or working time
- Low VOC
- low odor
- Suitable for use in USDA inspected facilities
Description:
This product is a high-solids, high-build polyaspartic developed for applications requiring a heavier bodied product. Its characteristics include excellent chemical resistance, adhesion, and resistance to UV degradation. It is low VOC product and is virtually odor free.
-
Features:
- Unaffected by MVT (moisture vapor transmission)
- Excellent chemical resistance
- High abrasion resistance
- Resistant to thermal shock
- Withstands mechanical stress
- Easy to clean and sterilize surface
- Resistant to steam cleaning
- Positive slip resistance
- May be applied to "green" concrete
- Ultra low VOC/odor
- Suitable for use in USDA inspected facilities
Description:
Highly functional trowel applied cementitious urethane mortar (1/4"-3/8" / 6-10 mm) that allows moisture to move through the material at a safe rate and offers significant lifecycle cost savings compared to tile or acid brick. It contains Polygiene® which has antimicrobial properties that protect it, and the facility it is installed in, from degradation caused by microorganisms. It provides protection from thermal shock at up to 250°F, mechanical damage, and chemical attack.