Showing 1–10 of 11 results
-
Features:
- Meets all VOC Requirements
- Low Odor/Solvent Free Compliant
- USDA compliant
- Stain Resistant with good cleanability
- Can be seeded for anti-skid surface
- Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties
Description:
A multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000 uses a moisture-tolerant primer and a flexible semi-self-leveling epoxy topcoat to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.
-
Features:
- Meets all VOC requirements
- Conductive
- Low odor
- Semi-self leveling to a high gloss finish at 20 mils
- Stain resistant with good cleanability
- Conductive anti-skid available
Description:
A 100% solids, multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000C uses a moisture-tolerant conductive primer and a flexible conductive semi-self leveling topcoat to achieve a strongly bonded flooring system with moderate chemical resistance, good physical and mechanical properties and static discharge properties.
-
Features:
- Industry standard for low cured emissions
- Meets all VOC Requirements
- Low Odor/Solvent Free Compliant
- USDA Compliant
- Semi-Self Leveling
- Stain Resistant with Good Cleanability
- Can be Seeded for Anti-Skid Surface
- Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties
Description:
Polymer Alloy 2000LE is a flexible, semi-self leveling, 100% solids epoxy floor topping with industry-leading low emissions testing. It is strongly bonded monolithic coating with moderate chemical resistance and good physical and mechanical properties. This product develops a cured strength 2-3 times that of the concrete base to which it is applied to provide exceptional durability and prolong the life of the substrate.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids static dissipative epoxy primer for concrete. It is used as part of static dissipative flooring system, intended to dissipate stray electrical current by running excess current to ground. It increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Meets all VOC Requirements
- 100% Solids
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid.
Description:
A 100% solids, flake-filled epoxy resin to protect concrete and metal substrates. The epoxy binder and overlapping flake fillers provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets SCAQMD Rule 1113 for VOC content
- Vertical and overhead applications
- Low odor
- Meets all VOC requirements
Description:
An epoxy based patching compound for filling surface defects and bugholes in concrete substrates. This product uses an epoxy resin and a unique, inert mineral filler to achieve a smooth non-slumping fill material. The system is formulated to improve the integrity and continuity of a prepared substrate, prior to the application of a coating or lining system.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance certification available upon request.
- Meets SCAQMD Rule 1113 for VOC content
- Contains 15% post industrial recycled product
- Low VOCs
- Low installation odor
- Can be seeded for anti-skid surface
- Stain resistance with excellent cleanability
- Can be reinforced with fiberglass to increase crack bridging properties
- USDA compliant
Description:
Steri-Flor GP is a self-leveling epoxy applied to achieve a strongly bonded monolithic topping with moderate chemical resistance and good physical and mechanical properties.
-
Features:
- Meets most VOC Requirements
- Low Odor
- User Friendly
- Tolerant to moisture vapor transmission (2)
Description:
A high solids epoxy primer for concrete. Designed to increase adhesion and reduce the potential for outgassing in high performance flooring or containment systems.