Showing 1–10 of 14 results
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
Description:
An optional pigmented gel coat that can be applied to the cured Protecto-Flake 800 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent abrasion resistance and hardness
- Low permeability
Description:
An optional pigmented gel coat that can be applied to the cured Protecto-Flake 900 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Densifies concrete surface
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC, deep penetrating epoxy primer for dense concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. Can be used to densify the surface of concrete.
-
Features:
- Meets all VOC Requirements
- 100% Solids
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid.
Description:
A 100% solids, flake-filled epoxy resin to protect concrete and metal substrates. The epoxy binder and overlapping flake fillers provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Complies with Greenbook
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties
- low permeability
- Single-coat application 20 to 125 mils
- Bridges normal shrinkage cracks in concrete
- Monolithic
- protective film for protection of steel and concrete
- Outstanding abrasion
- impact and tear resistance
- Commonly used for Waffle Decks
- where it can be cut away when needed.
Description:
Plural-component applied coating used as a lining in the technology manufacturing facilities to protect the substrate from traffic and moderate chemical exposure. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.
-
Features:
- Superior abrasion resistance and hardness
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Low coefficient of friction
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for higher abrasion resistance than standard Protecto-Coat 800.
-
Features:
- High temperature resistance
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Low coefficient of friction
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for a higher wet immersion temperature resistance than standard Protecto-Coat 800.
-
Features:
- Fire Retardant
- Excellent Chemical Resistance
- Conductive Version Available
- Low Permeability
Description:
Protecto-Coat 900FR exhibits a high cross-link density and offers the best solvent and acid resistance. Protecto-Coat 900FR systems are filled with Mica flakes to reduce the coefficient of expansion, and provide a chemical resistant barrier. The lamellar arrangement of flakes reduces water vapor permeation and permits chemical exposure at higher temperatures without increasing the thickness of the coating.
-
Features:
- Excellent overall chemical resistance
- Easily applied by spray
- Acceptable for use over stainless steel
- Excellent barrier protection
Description:
A self-priming amine-cured, epoxy phenolic, glass flake-filled coating designed for use in highly corrosive environments where abrasion and chemical resistance is required. This product also exhibits excellent heat resistance.
-
Features:
- Resistance to vibration
- impact
- shock
- and thermal cycling
- May be used to repair polyurethane linings
- Flexible
- Chemical Resistant
- VOC Compliant
Description:
A two-component, high solids, elastomeric, chemically resistant polysulfide coating.