Showing 1–10 of 34 results
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
Description:
An optional pigmented gel coat that can be applied to the cured Protecto-Flake 800 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent abrasion resistance and hardness
- Low permeability
Description:
An optional pigmented gel coat that can be applied to the cured Protecto-Flake 900 lining to provide a very smooth surface sometimes required to prevent the vessel contents from adhering. It also provides an added measure of protection from product contamination.
-
Features:
- Dissipative in the range of 1 x 106 to 109 ohms
- Meets all VOC requirements
- Low odor/Solvent-free compliant
- USDA compliant
- Stain-resistant with good cleanability
- Can be broadcast into for non-skid surface (conductive aggregate only)
Description:
A static dissipative, semi self-leveling novolac epoxy floor topping engineered to instill electrostatic control characteristics. This product uses a moisture-tolerant primer to achieve a strongly bonded monolithic topping with moderate chemical resistance to splash and spillage, and good physical and mechanical properties.
-
Features:
- Good overall chemical resistance
- Simple troweled application
- Zero VOC
- Excellent adhesion
- Superior abrasion resistance
Description:
A ceramic carbide epoxy putty designed to resistance against severe abrasion, impact and cavitation. It resists a wide variety of chemicals and reinforces wear-plates in material handling service.
-
Features:
- Rapid cure for service (dry to touch in 1 hour)
- Convenient half kit packaging to reduce waste
- Good overall chemical resistance
- Simple troweled application
- High build capabilities
- Zero VOC
- Excellent adhesion
- Excellent abrasion resistance
- Sandable
Description:
An emergency grade, multi-functional epoxy putty for applications where downtime is minimal. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Good overall chemical resistance
- Simple troweled application
- Machinable in 2-4 hours
- Zero VOC
- Excellent adhesion
- Excellent abrasion resistance
- Sandable
Description:
A machine grade epoxy putty for repairing damaged shafts, valves, and other mated metal surfaces. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Good overall chemical resistance
- Simple troweled application
- High build capabilities
- Zero VOC
- Excellent adhesion
- Excellent abrasion resistance
- Sandable
Description:
A rebuild grade, multi-functional epoxy putty for restoring eroded or cavitated areas of metal to its original contour. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Smooth
- slick finish
- Corrosion and galvanic resistant
- Good overall chemical resistance
- High build capabilities
- Zero VOC
- Exceptional adhesion
- Excellent abrasion resistance
Description:
A surface grade, fluid applied epoxy coating used to provide both corrosion and erosion protection for degraded steel substrates. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Smooth
- slick finish
- Corrosion and galvanic resistant
- Good overall chemical resistance
- High build capabilities
- Zero VOC
- Exceptional adhesion
- Excellent abrasion resistance
Description:
A surface grade, fluid applied epoxy coating used to provide both corrosion and abrasion resistance for degraded steel substrates. It resists a wide variety of chemicals and is engineered to repair corroded and worn metallic surfaces efficiently and economically.
-
Features:
- Can minimize outgassing on concrete
- Promotes higher adhesion values between the substrate and lining material
- Low viscosity promotes increased wet out of surface
- Long pot life
- Long recoat window (5 days @ 75°F/23°C)
- Primer for polyester and vinyl ester systems
Description:
A primer designed to provide improved adhesion when installing high performance linings over properly prepared concrete and steel. It lowers the chances of outgassing when used over concrete and can be used as a holding primer for abrasive blasted steel.