Showing 1–10 of 27 results
-
Features:
- State of Florida: Secondary Containment Approval EQ-510
- Long term abrasion and chemical resistance
- Excellent bond strength assures good adhesion
- Factory proportioned packaging ensures consistent high quality and simplified mixing
- VOC Compliant in all U.S. states
Description:
Caulk PSC is a two-component, 100% solids, chemically resistant sealant. It will withstand repeated expansion and contraction and remain resilient through daily and seasonal cyclic changes in temperature. Caulk PSC is to be used as a general purpose expansion joint sealant designed for splash and spill and secondary containment of moderate strength acids, alkalis and some solvents typically found in industrial chemical processing.
-
Features:
- Exceptional strength and durability
- Excellent chemical resistance to a wide range of chemicals
- High resistance to abrasion
- Extremely low shrinkage
Description:
A three-component, epoxy mortar that is well suited for the construction of floors or structures requiring resistance to dilute acids, alkalis, and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.
-
Features:
- Exceptional strength and durability
- Excellent chemical resistance to a wide range of chemicals
- High resistance to abrasion
- Extremely low shrinkage
Description:
A three-component, vinyl ester mortar that is well suited for the construction of floors or structures requiring resistance to mild acids, alkalis, and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.
-
Features:
- Exceptional strength and durability
- Excellent chemical resistance to a wide range of chemicals
- High resistance to abrasion
- Extremely low shrinkage
Description:
A three-component, novolac vinyl ester mortar that is well suited for the construction of floors or structures requiring resistance to strong acids, alkalis, solvents and other corrosive chemicals. The material exhibits excellent bond strength to concrete and physical properties at least 3 times that of standard concrete. Suitable for use in areas exposed to heavy traffic and abuse.
-
Features:
- Can minimize outgassing on concrete
- Promotes higher adhesion values between the substrate and lining material
- Low viscosity promotes increased wet out of surface
- Long pot life
- Long recoat window (5 days @ 75°F/23°C)
- Primer for polyester and vinyl ester systems
Description:
A primer designed to provide improved adhesion when installing high performance linings over properly prepared concrete and steel. It lowers the chances of outgassing when used over concrete and can be used as a holding primer for abrasive blasted steel.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Densifies concrete surface
- Low VOC
- Low Odor
- Meets SCAQMD Rule 1113 for VOC content
- VOC Compliant with LEED 4.1
Description:
A low VOC, deep penetrating epoxy primer for dense concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. Can be used to densify the surface of concrete.
-
Features:
- Broad spectrum chemical resistance
- Superior adhesion to metal substrates and concrete
- Blush resistant formulation
- Meets all VOC Requirements
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid
Description:
Protecto-Coat 100XT is a 100% solids, flake-filled, high functionality, novolac epoxy coating. The novolac epoxy binder and overlapping flake fillers in Protecto-Coat 100XT provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Broad spectrum chemical resistance
- Superior adhesion to metal substrates and concrete
- Blush resistant formulation
- Meets all VOC Requirements
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid
Description:
A high-performance, 100% solids, low odor, environmentally safe novolac epoxy coating. Protecto-Coat 105XT uses a moisture-tolerant primer and two coats of graphite flake-filled novolac epoxy resin to protect concrete and metal substrates. The novolac epoxy binder and overlapping flake filler provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Meets all VOC Requirements
- 100% Solids
- Can be seeded with Sand or Aluminum Oxide for Anti-Skid.
Description:
A 100% solids, flake-filled epoxy resin to protect concrete and metal substrates. The epoxy binder and overlapping flake fillers provide the low permeability, high film integrity, and excellent chemical resistance required for prolonged substrate protection.
-
Features:
- Complies with Greenbook
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties
- low permeability
- Single-coat application 20 to 125 mils
- Bridges normal shrinkage cracks in concrete
- Monolithic
- protective film for protection of steel and concrete
- Outstanding abrasion
- impact and tear resistance
- Commonly used for Waffle Decks
- where it can be cut away when needed.
Description:
Plural-component applied coating used as a lining in the technology manufacturing facilities to protect the substrate from traffic and moderate chemical exposure. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.