Showing 11–20 of 34 results
-
Features:
- Complies with Greenbook
- Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties
- low permeability
- Single-coat application 20 to 125 mils
- Bridges normal shrinkage cracks in concrete
- Monolithic
- protective film for protection of steel and concrete
- Outstanding abrasion
- impact and tear resistance
- Commonly used for Waffle Decks
- where it can be cut away when needed.
Description:
Plural-component applied coating used as a lining in the technology manufacturing facilities to protect the substrate from traffic and moderate chemical exposure. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.
-
Features:
- Superior abrasion resistance and hardness
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Low coefficient of friction
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for higher abrasion resistance than standard Protecto-Coat 800.
-
Features:
- High temperature resistance
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Low coefficient of friction
- FDA compliant
- Low permeability
Description:
A thermosetting vinyl ester coating which utilizes flake fillers for resistance to a wide variety of acids, caustics, salts, oils and mild alkali solutions. It is formulated for a higher wet immersion temperature resistance than standard Protecto-Coat 800.
-
Features:
- Excellent overall chemical resistance
- Easily applied by spray
- Acceptable for use over stainless steel
- Excellent barrier protection
Description:
A self-priming amine-cured, epoxy phenolic, glass flake-filled coating designed for use in highly corrosive environments where abrasion and chemical resistance is required. This product also exhibits excellent heat resistance.
-
Features:
- Resistance to vibration
- impact
- shock
- and thermal cycling
- May be used to repair polyurethane linings
- Flexible
- Chemical Resistant
- VOC Compliant
Description:
A two-component, high solids, elastomeric, chemically resistant polysulfide coating.
-
Features:
- Superior chemical resistance
- Excellent abrasion resistance
- FDA Compliant
- Very Low Permeability
Description:
A high molecular weight novolac vinyl ester resin based lining also filled with large diameter glass flakes which provides exceptionally low permeability. It is used in high temperature and high abrasion environments.
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
- Conductive system available (Protecto-Glass 865)
Description:
A high-performance, highly chemical resistant lining that uses several layers of thermosetting, filled vinyl ester resin to build up protection on metal and concrete. It is well suited for chemical manufacturing or processing operations. Used as a component of a system with fiberglass reinforcement, the separate elements lose their individual identity and become a single, monolithic lining.
-
Features:
- Exceptional resistance to inorganic and organic acids
- Excellent caustic and alkaline solution resistance
- Excellent abrasion resistance and hardness
- FDA compliant
- Low permeability
Description:
A high-performance, highly chemical resistant lining that uses several layers of thermosetting, filled vinyl ester resin to build up protection on metal and concrete. It is well suited for chemical manufacturing or processing operations. Blended with different fillers and used as a component of a system with woven roving, the separate elements lose their individual identity and become a single, monolithic lining.
-
Features:
- Very good chemical resistance
- Resists repeated cleaning
- Gloss finish for ease of cleaning
- Low odor
- VOC is < 100 g/L
- Fast dry to touch and recoat
- Hard
- tough
- abrasion resistant film
- Suitable for use in USDA inspected facilities
- Breathable for concrete with high moisture vapor transmission
- when used as part of an all waterbased system
Description:
A water-based epoxy finish that is easy to apply and has very good chemical resistance. Sanitile 555 VOC has minimal odor and is less than 100 g/L VOC. It has significant improvements in film hardness and toughness over straight acrylic or acrylic-epoxy coatings and is more chemically and physically resistant. It is therefore ideal for more aggressive exposures on walls and structural components than acrylic-modified epoxies. It may also be used for light to moderate duty floors.
-
Features:
- Vertical and overhead applications
- Sandable
- Easy application and workability
- Meets most VOC requirements
Description:
A vinyl ester based patching compound for filling surface defects and bugholes in concrete substrates. This product uses an epoxy resin and a unique, inert mineral filler to achieve a smooth non-slumping fill material. The system is formulated to improve the integrity and continuity of a prepared substrate, prior to the application of a coating or lining system.