Showing 1–10 of 13 results
-
Features:
- Meets all VOC requirements
- Conductive
- Low odor
- Semi-self leveling to a high gloss finish at 20 mils
- Stain resistant with good cleanability
- Conductive anti-skid available
Description:
A 100% solids, multi-functional semi-self leveling epoxy floor topping. Polymer Alloy 2000C uses a moisture-tolerant conductive primer and a flexible conductive semi-self leveling topcoat to achieve a strongly bonded flooring system with moderate chemical resistance, good physical and mechanical properties and static discharge properties.
-
Features:
- Industry standard for low cured emissions
- Meets all VOC Requirements
- Low Odor/Solvent Free Compliant
- USDA Compliant
- Semi-Self Leveling
- Stain Resistant with Good Cleanability
- Can be Seeded for Anti-Skid Surface
- Can Saturate Fiberglass Reinforcement for Better Crack Bridging Properties
Description:
Polymer Alloy 2000LE is a flexible, semi-self leveling, 100% solids epoxy floor topping with industry-leading low emissions testing. It is strongly bonded monolithic coating with moderate chemical resistance and good physical and mechanical properties. This product develops a cured strength 2-3 times that of the concrete base to which it is applied to provide exceptional durability and prolong the life of the substrate.
-
Features:
- Can minimize outgassing on concrete
- Promotes higher adhesion values between the substrate and lining material
- Low viscosity promotes increased wet out of surface
- Long pot life
- Long recoat window (5 days @ 75°F/23°C)
- Primer for polyester and vinyl ester systems
Description:
A primer designed to provide improved adhesion when installing high performance linings over properly prepared concrete and steel. It lowers the chances of outgassing when used over concrete and can be used as a holding primer for abrasive blasted steel.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids epoxy primer for steel and concrete. It is used to increase adhesion and reduce the potential for outgassing on concrete substrates. It can also be used to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.
-
Features:
- Tolerant to moisture vapor transmission (2 / 2)
- Meets most VOC Requirements
- Low Odor
- User Friendly
Description:
A high solids conductive epoxy primer for concrete, used in place of traditional primers when the coating or lining system must be holiday tested. It is also used as part of conductive flooring systems, intended to dissipate stray electrical current by running excess current to ground. In both uses, it increases adhesion and reduces the potential for outgassing on concrete substrates.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017 Compliance Certificates Available Upon Request
- Meets SCAQMD Rule 1113 for VOC content
- User friendly application
- Field and shop application
- Soap & water clean up
- Low odor
- low VOC’s
- Excellent adhesion and chemical & abrasion resistance
Description:
Sealer 200SD is a two component, water borne electrostatic, dissipative, aliphatic urethane floor coating that offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration, impact and staining.
-
Features:
- Field & shop application
- Soap & water clean up
- Low odor
- Low VOCs
- Excellent adhesion
- Excellent chemical & abrasion resistance
- Also available in satin
Description:
A two-component waterborne urethane coating that offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration, impact, and staining with easy soap and water cleanup.
-
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017 Compliance Certificates Available Upon Request
- Permanent ESD Stability
- Meets SCAQMD Rule 1113 for VOC content
- High Solids
- Excellent Color Stability
- Good Stain Resistance
- VOC Compliant
Description:
A two-component, ASTM Type V, aliphatic polyurethane coating. Sealer 30SD offers the outstanding color stability, resistance to UV degradation, and electrostatic dissipative capability. Toughness, impact resistance, and stain resistance are inherent qualities of this topcoat.
-
Features:
- Unaffected by MVT (moisture vapor transmission)
- Excellent chemical resistance
- High abrasion resistance
- Industry leading range for thermal shock (-350 to 400°F)
- Withstands mechanical stress
- Easy to clean and sterilize surface
- Resistant to steam cleaning
- Positive slip resistance
- May be applied to "green" concrete
- Ultra low VOC/odor
- Suitable for use in USDA inspected facilities
- Resistant to liquid nitrogen (Contact Dudick for recommendations when dealing with liquid nitrogen exposure)
Description:
Liquid nitrogen resistant for splash and spill, trowel applied cementitious urethane mortar (1/4"-1/2" / 6-13 mm). Contains antimicrobial additives that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.
-
Features:
- Zero VOCs
- Low installation odor
- Can be broadcasted for anti-skid surface
- Stain resistance with excellent cleanability
- Can be reinforced with fiberglass to increase crack bridging properties
- USDA compliant
- MMA Alternative
Description:
Steri-Flor CT is a self-leveling epoxy and binder resin designed for rapid return to service that creates a strongly bonded monolithic coating with moderate chemical resistance and good physical properties.