A two-component, ASTM Type V, polyaspartic coating that offers the outstanding color stability and resistance to UV degradation known industry wide to be inherent of polyaspartic chemistry. Toughness, impact resistance, and stain resistance are inherent qualities of Sealer 70.
Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2. 2017 (Compliance Certificates Available Upon Request)
- Meets SCAQMD Rule 1113
- USDA Compliant
- High Solids
- Excellent Color Stability
- Good Stain Resistance
- VOC Compliant
- Fast Cure
Color:
- Clear and Standard Colors
- Standard Color Chart available upon request
Finish:
- Gloss
Primer:
- Primer 70
- Other basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.
Dry Film Thickness:
- 5 – 16 mils (127 – 406 microns) per coat
- Not to exceed 20 mils (500 microns) per coat
Typical Uses:
- Clean Rooms
- Warehouses
- Floors
- Maintenance
- Laboratories
Solids Content:
- By Volume: 95%
Theoretical Coverage Rate:
- 1,524 ft²/gal at 1.0 mils (37.4 m²/l at 25 microns)
- 305 ft²/gal at 5.0 mils (7.5 m²/l at 125 microns)
- 95 ft²/gal at 16.0 mils (2.3 m²/l at 400 microns)
- Allow for loss in mixing and application.
VOC Values:
- As Supplied: 10 g/L
Chemical Resistance Tables:
- Water
- Oils
- Solvents
- Gasoline
- Sodium Hydroxide – 50%
- Jet Fuel
- Dilute Organic/Inorganic Acids
