Sealer 70 Gloss

A two-component, ASTM Type V, polyaspartic coating that offers the outstanding color stability and resistance to UV degradation known industry wide to be inherent of polyaspartic chemistry. Toughness, impact resistance, and stain resistance are inherent qualities of Sealer 70.

Features:

  • Contributes toward satisfying credit for low emitting material under LEED 4.1
  • Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2. 2017 (Compliance Certificates Available Upon Request)
  • Meets SCAQMD Rule 1113
  • USDA Compliant
  • High Solids
  • Excellent Color Stability
  • Good Stain Resistance
  • VOC Compliant
  • Fast Cure

Color:

  • Clear and Standard Colors
  • Standard Color Chart available upon request

Finish:

  • Gloss

Primer:

  • Primer 70
  • Other basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.

Dry Film Thickness:

  • 5 – 16 mils (127 – 406 microns) per coat
  • Not to exceed 20 mils (500 microns) per coat

Typical Uses:

  • Clean Rooms
  • Warehouses
  • Floors
  • Maintenance
  • Laboratories

Solids Content:

  • By Volume 95%

Theoretical Coverage Rate:

  • 1,524 ft²/gal at 1.0 mils (37.4 m²/l at 25 microns)
  • 305 ft²/gal at 5.0 mils (7.5 m²/l at 125 microns)
  • 95 ft²/gal at 16.0 mils (2.3 m²/l at 400 microns)
  • Allow for loss in mixing and application.

VOC Values:

  • As Supplied: 10 g/L

Chemical Resistance Tables:

  • Water
  • Oils
  • Solvents
  • Gasoline
  • Sodium Hydroxide – 50%
  • Jet Fuel
  • Dilute Organic/Inorganic Acids

Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]