A premium fluoropolymer urethane sealer/topcoat that offers the outstanding color stability and resistance to UV degradation known industry wide to be inherent of fluoropolymer chemistry. Toughness and resistance to impact and staining are also characteristic of Sealer 50.
Technical Data Sheet | Safety Data Sheet [Comp A] | Safety Data Sheet [Comp B]
Features:
- Contributes toward satisfying credit for low emitting material under LEED 4.1
- Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017 (compliance certificates available upon request)
- Meets SCAQMD Rule 1113 for VOC content
- Excellent Color Stability
- Excellent Stain Resistance
Color:
- Clear and Standard Colors
- Standard Color Chart available upon request
Finish:
- Gloss
Primer:
- Primer 67, Primer 67LV or others as recommended by Dudick.
- Other epoxy basecoats may be used based on exposure and environment. Contact a Dudick representative for recommendations.
Dry Film Thickness:
- 1.5 – 2 mils (38 – 51 microns) DFT
Typical Uses:
- Clean Rooms
- Warehouse
- Floors
- Airplane Hangars
- Hospitals / Operating Rooms
- Maintenance
Solids Content:
- By Volume: 30%
Theoretical Coverage Rate:
- 481 ft²/gal at 1.0 mils (11.8 m²/l at 25 microns)
- 321 ft²/gal at 1.5 mils (7.9 m²/l at 38 microns)
- 241 ft²/gal at 2.0 mils (5.9 m²/l at 50 microns)
- Allow for loss in mixing and application.
VOC Values:
- As Supplied: <50 g/L
Chemical Resistance Tables:
- Betadine
- Oils
- Gasoline
- Jet Fuel
- Sodium Hydroxide – 50%
- Bleach Solutions
- Solvents
- Sulfuric Acid – 50%
- Skydrol
- Hydrogen
- Peroxide
