SDS Sheets

Locate and download SDS sheets for all Dudick products.

Please Be Advised!

We are in the process of updating our product SDS’ and our website. Safety Data Sheets for our products in the new GHS SDS format required by OSHA effective June 1, 2015 will be available upon request while this process is underway. Please contact Dudick, Inc. at 800-322-1970 or your account representative.

Block Filler

Trowel, squeegee or roller applied epoxy material for concrete.

Block Filler COMP A
Block Filler COMP B 

Caulk 100XT

Two-Component, fluoroelastomer joint sealant.

Caulk 100XT COMP A
Caulk 100XT COMP B

Caulk 149

100% solids, two-component polysulfide expansion / control joint sealant.

Caulk 149 COMP A
Caulk 149 COMP B 

Caulk PSC

Elastomeric polysulfide caulk.

Caulk PSC COMP A
Caulk PSC COMP B 

C-Grout

Fast-setting, cementitious repair grout 1/2″ minimum thickness.

C-Grout

G-1 Filler

Scratch-Coat 800 Filler.

G-1 Filler

G-2 Filler

Scratch-Coat 800 Filler.

G-2 Filler

Gel-Coat 800

Provides smooth surface and added protection from chemical contamination over Protecto-Flake 800.

Gel-Coat 800
PH-1 Hardener 

Gel-Coat 900

Provides smooth surface and added protection from chemical contamination over Protecto-Flake 900.

Gel-Coat 900
PH-1 Hardener 

Grout 100

Epoxy based pourable and dry pack grout.

Grout 100 Comp A
Grout 100 Comp B

Grout 800

Vinyl ester pourable and dry pack grout.

Grout 800
PH-1 Hardener
Grout Aggregate 

Grout 900

Novolac vinyl ester pourable and dry pack grout.

Grout 900
PH-1 Hardener
Grout Aggregate

Membrane 310

Flexibilized, moisture proof epoxy membrane 20-30 mils.

Membrane 310 COMP A
Membrane 310 COMP B
Primer 67 COMP A
Primer 67 COMP B

PH-1 Hardener

Polyester/Vinyl Ester Hardener.

PH-1 Hardener

Polymer Alloy 1000

100% solids, multi-functional, semi-self leveling or seeded epoxy floor topping applied at 20 mils (0.5 mm).

Polymer Alloy 1000 COMP A
Polymer Alloy 1000 COMP B
Primer 67 COMP A
Primer 67 COMP B

Polymer Alloy 1200

High gloss or satin finish at 15 mils. Can be seeded for anti-skid. Stain resistant with good clean ability.

Polymer Alloy 1200BC COMP A
Polymer Alloy 1200BC COMP B
Polymer Alloy 1200TC COMP A
Polymer Alloy 1200TC COMP B 
Primer 67 COMP A
Primer 67 COMP B

Polymer Alloy 2000

100% Solids Multi-Functional Semi-Self Leveling or Seeded, Chemical Resistant, Epoxy Floor Topping.

Polymer Alloy 2000 COMP A
Polymer Alloy 2000 COMP B
Primer 67 COMP A
Primer 67 COMP B

Polymer Alloy 2000C

100% solids, multi-functional, conductive semi-self leveling epoxy floor topping, 20-25 MILS.

Polymer Alloy 2000C COMP A
Polymer Alloy 2000C COMP B
Primer 67C COMP A
Primer 67C COMP B 

Polymer Alloy 2000SD

100% solids, static dissipative, multi-functional, semi-self leveling epoxy floor topping 15-50 MILS (0.39-1.3mm).

Polymer Alloy 2000 SD COMP A
Polymer Alloy 2000 SD COMP B
Primer 67 SD COMP A
Primer 67 SD COMP B

Polymer Alloy 2000SF

Solvent free, medium-heavy traffic industrial floor.

Alloy 2000SF COMP A
Alloy 2000SF COMP B
Primer 67 COMP A
Primer 67 COMP B
Broadcast Sand

Polymer Concrete 100

Trowel applied, three component epoxy polymer concrete.

Polymer Concrete 100 COMP A
Polymer Concrete 100 COMP B
Polymer Concrete Aggregate
Primer 67 COMP A
Primer 67 COMP B

Polymer Concrete 100XT

Trowel applied three component novolac epoxy polymer concrete.

Polymer Concrete 100XT COMP A
Polymer Concrete 100XT COMP B
Polymer Concrete Aggregate
Primer 67 COMP A
Primer 67 COMP B

Polymer Concrete 800

Trowel applied three component vinyl ester polymer concrete.

Polymer Concrete 800 COMP A
Polymer Concrete Aggregate
PH-1 Hardener
Primer 27

Polymer Concrete 900

Trowel applied, three component, novolac vinyl ester polymer concrete.

Polymer Concrete 900 COMP A
Polymer Concrete Aggregate
PH-1 Hardener
Primer 27

Polymer Carbide

The Polymer Carbide is a 60-65 mil ceramic filled, epoxy putty.

Polymer Carbide Base
Polymer Carbide Hardener 

Polymer Quartz

Concrete repair grout material.

Polymer Quartz COMP A
Polymer Quartz COMP B
Polymer Quartz Filler

Polymer Steel EG

100% Solids, aluminum oxide-filled, fast setting epoxy putty, highbuild capabilities.

Polymer Steel EG Base
Polymer Steel EG Hardener 

Polymer Steel MG

100% solids, metal filled machineable epoxy putty.

Polymer Steel MG Base
Polymer Steel MG Hardener 

Polymer Steel RG

100% solids, aluminum oxide-filled, multifunctional epoxy putty, highbuild capabilities.

Polymer Steel RG Base
Polymer Steel RG Hardener 

Polymer Steel SG

100% solids, aluminum-oxide filled multifunctional epoxy coating, can be used over RG Grade for a smoother finish.

Polymer Steel SG Base
Polymer Steel SG Hardener

Primer 27

Vinyl ester primer for steel and concrete 3-4 MILS (0.1mm).

Primer 27
PH-1 Hardener 

Primer 27C

Vinyl ester primer for steel and concrete 3-4 MILS (0.1mm).

Primer 27C
PH-1 Hardener 

Primer 47

100% Reactive, Acrylic primer for concrete, 5-7 Mills.

Primer 47
MH-1 Hardener

Primer 67

High solids, moisture tolerant epoxy primer for steel and concrete 3-4 MILS (0.1 mm).

Primer 67 COMP A
Primer 67 COMP B 

Primer 67 DP

Deep penetrating, moisture tolerant epoxy primer for dense high compressive strength concrete.

Primer 67 DP COMP A
Primer 67 DP COMP B 

Primer 67DP LV

Low VOC, Deep penetrating, moisture tolerant epoxy primer for dense high compressive strength concrete.

Primer 67DP LV COMP A
Primer 67DP LV COMP B 

Primer 67 DTO

100% solids, moisture tolerant epoxy primer for concrete contaminated with begetable and petroleum oils 4-6 MILS.

Primer 67 DTO COMP A
Primer 67 DTO COMP B

Primer 67C

High solids, moisture tolerant epoxy primer for steel and concrete 3-4 MILS (0.1 mm).

Primer 67C COMP A
Primer 67C COMP B 

Primer 67LV

Low VOC, High solids, moisture tolerant epoxy primer for steel and concrete 3-4 MILS (0.1 mm).

Primer 67LV COMP A
Primer 67LV COMP B 

Protecto-Coat 100XT

Flake filled, high performance, 100% solids, Novolac epoxy coating, low odor, environmentally safe, 30-40 MILS (1 mm).

Protecto-Coat 100XT COMP A
Protecto-Coat 100XT COMP B
Primer 67 COMP A
Primer 67 COMP B

Protecto-Coat 1130

Flake glass filled, 100% solids, high performance, multi-functional epoxy coating, 30-40 MILS (1mm).

Protecto-Coat 1130 COMP A
Protecto-Coat 1130 COMP B
Primer 67 COMP A
Primer 67 COMP B

Protecto-Coat 300

Flake filled, 100% solids, high build epoxy coating; 12-16 MILS (.4 mm).

Protecto-Coat 300 COMP A
Protecto-Coat 300 COMP B
Primer 67 COMP A
Primer 67 COMP B

Protecto-Coat 306DTR

High solids, flake filled, self-priming, direct to rust epoxy coating for exterior applications, 8-10 MILS.

Protecto-Coat 306DTR COMP A
Protecto-Coat 306DTR COMP B 

Protecto-Coat 325

Flake filled, 100% solids, high build epoxy coating; 12-16 MILS (.4 mm).

Protecto-Coat 325 COMP A
Protecto-Coat 325 COMP B
Primer 67 COMP A
Primer 67 COMP B

Protecto-Coat 330

Flake-filled, high build epoxy coating, 12-16 MILS (.4 mm).

Protecto-Coat 330 COMP A
Protecto-Coat 330 COMP B
Primer 67 COMP A
Primer 67 COMP B

Protecto-Coat 800

Flake filled, vinyl ester coating, 30-40 MILS (1.0mm).

Protecto-Coat 800
Primer 27
PH-1 Hardener

Protecto-Coat 800NS

Polytetrafluoroethylene (PTFE) filled, vinyl ester coating, 30-60 MILS (1-1.4mm).

Protecto-Coat 800NS
PH-1 Hardener
Primer 27

Protecto-Coat 800HT

High temperature flake filled Vinyl Ester – 30 to 60 MILS.

Protecto-Coat 800HT
Primer 27 
PH-1 Hardener

Protecto-Coat 805

Flake filled, vinyl ester coating, 30-40 MILS (1.0mm).

Protecto-Coat 805
Primer 27 
PH-1 Hardener

Protecto-Coat 900

Flake filled, vinyl ester coating, 30-40 MILS (1.0mm).

Protecto-Coat 900
Primer 27 
PH-1 Hardener

Protecto-Coat 900NS

Polyetrafluoroethylene (PTFE) filled, high performance, novolac vinyl ester coating, 30-60 MILS (1-1.4mm).

Protecto-Coat 900NS
PH-1 Hardener
Primer 27

Protecto-Coat 900HT

High temperature flake filled Novolac Vinyl Ester – 30 to 60 MILS.

Protecto-Coat 900HT
Primer 27 
PH-1 Hardener

Protecto-Coat 905

Flake filled, novolac vinyl ester coating 30-40 MILS (1.0 mm).

Protecto-Coat 905
Primer 27 
PH-1 Hardener

Protecto-Coat EPG

Epoxy phenolic glass flake coating

Protecto-Coat EPG COMP A
Protecto-Coat EPG COMP B
Primer 67 COMP A
Primer 67 COMP B
S-12 Solvent

Protecto-Coat PS

Elastomeric polysulfide coating.

Protecto-Coat PS COMP A
Protecto-Coat PS COMP B

Protecto-Crete 140T

Trowel applied or seeded novolac epoxy topping and resurfacer.

Protecto-Crete 140 T COMP A
Protecto-Crete 140 T COMP B
Primer 67 COMP A
Primer 67 COMP B

Protecto-Crete 140TSF

Trowel applied or seeded novolac epoxy topping and resurfacer.

Protecto-Crete 140 TSF COMP A
Protecto-Crete 140 TSF COMP B
Primer 67 COMP A
Primer 67 COMP B
Broadcast Sand

Protecto-Crete 350

Squeegee-applied, 100% solids, semi-self-leveling, static dissipative epoxy floor topping, 55-60 mils (1.4-1.5 mm).

Protecto-Crete 350 SD Grey COMP A
Protecto-Crete 350 SD COMP B
Protecto-Crete 350 SD Black COMP A
Protecto-Crete 350 SD Filler
Primer 67 SD COMP A
Primer 67 SD COMP B

Protecto-Crete 800

Troweled or seeded vinyl ester floor topping.

Protecto-Crete 800
Primer 27
PH-1 Hardener
EA-1 Filler

Protecto-Crete 800SF

Troweled or seeded vinyl ester floor topping.

Protecto-Crete 800 SF
Primer 27
Broadcast Sand

Protecto-Crete 900

Troweled or seeded, high molecular weight, novolac vinyl ester floor topping.

Protecto-Crete 900
Primer 27
PH-1 Hardener
EA-1 Filler

Protecto-Crete 900SF

Troweled or seeded, high molecular weight, novolac vinyl ester floor topping.

Protecto-Crete 900SF
Primer 27
PH-1 Hardener
Broadcast Sand

Protecto-Flake 800

Glass flake filled, trowel applied, high molecular weight vinyl ester tank lining, 60-80 MILS (2mm).

Protecto-Flake 800
PH-1 Hardener
Styrene
Primer 27

Protecto-Flake 900

Glass flake filled, trowel applied, high molecular weight vinyl ester tank lining, 60-80 MILS (2mm).

Protecto-Flake 900
PH-1 Hardener
Styrene
Primer 27

Protecto-Flex 100 XT

Trowel applied, glass reinforced, epoxy lining with novolac epoxy topcoat 100-110 MILS (2.2-2.4mm).

Protecto-Flex 100 XT Basecoat COMP A
Protecto-Flex 100 XT Basecoat COMP B
Protecto-Flex 100 XT Topcoat COMP A
Protecto-Flex 100 XT Topcoat COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat

Protecto-Flex 310

Trowel applied, glass reinforced, epoxy lining, 90 MILS (2.1 mm).

Protecto-Flex 310 Basecoat COMP A
Protecto-Flex 310 Basecoat COMP B
Protecto-Flex 310 Topcoat COMP A
Protecto-Flex 310 Topcoat COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat

Protecto-Flex 800

Trowel applied, glass reinforced, flexible epoxy lining, with a vinyl ester topcoat 100-110 MILS (2.2 – 2.4 mm).

Protecto-Flex 800 Basecoat COMP A
Protecto-Flex 800 Basecoat COMP B
Protecto-Flex 800 Topcoat
Primer 67 COMP A
Primer 67 COMP B
PH-1 Hardener

Protecto-Flex 800 SF

Trowel applied, glass reinforced, flexible epoxy lining, with a seeded vinyl-ester topcoat 120-140 mils (3.0-3.5 mm).

Protecto-Flex 800 SF Basecoat COMP A
Protecto-Flex 800 SF Basecoat COMP B
Protecto-Flex 800 SF Topcoat
Primer 67 COMP A
Primer 67 COMP B
PH-1 Hardener
Broadcast Sand

Protecto-Flex 805

Trowel applied, glass reinforced, epoxy lining, with a graphite filled vinyl ester topcoat 100-110 MILS (2.2-2.4 mm).

Protecto-Flex 805 Basecoat COMP A
Protecto-Flex 805 Basecoat COMP B
Protecto-Flex 805 Topcoat
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat
PH-1 Hardener

Protecto-Flex 900

Trowel applied, glass reinforced, flexible epoxy lining, with flake filled vinyl ester intermediate coat and novolac vinyl ester topcoat 100-110 MILS.

Protecto-Flex 900 Basecoat COMP A
Protecto-Flex 900 Basecoat COMP B
Protecto-Flex 900 Topcoat
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat
PH-1 Hardener

Protecto-Flex 905

Trowel applied, glass reinforced, flexible epoxy lining, with a graphite filled novolac vinyl ester topcoat 100-110 MILS (2.2-2.4 mm).

Protecto-Flex 905 Basecoat COMP A
Protecto-Flex 905 Basecoat COMP B
Protecto-Flex 905 Topcoat
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat
PH-1 Hardener

Protecto-Glass 1130

Trowel applied, reinforced, high performance, multi-functional, 100% solids, epoxy lining 90 MILS (2.3 mm).

Protecto-Glass 1130 Basecoat COMP A
Protecto-Glass 1130 Basecoat COMP B
Protecto-Glass 1130 Topcoat COMP A
Protecto-Glass 1130 Topcoat COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat

Protecto-Glass 160XT

100% solids, trowel applied, reinforced, novolac epoxy lining, 90 MILS (2.3mm).

Protecto-Glass 160XT Basecoat COMP A
Protecto-Glass 160XT Basecoat COMP B
Protecto-Glass 160XT Topcoat COMP A
Protecto-Glass 160XT Topcoat COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat

Protecto-Glass 860

Trowel applied, reinforced, vinyl ester lining & floor topping, 90 MILS (2.3 mm).

Protecto-Glass 860 Basecoat
Protecto-Glass 860 Topcoat
Primer 27
G-1 Filler
1 Ounce Mat
PH-1 Hardener

Protecto-Glass 865

Trowel applied, reinforced, vinyl ester lining & floor topping, 90 MILS (2.3 mm).

Protecto-Glass 865 Basecoat
Protecto-Glass 865 Topcoat
Primer 27
G-1 Filler
1 Ounce Mat
PH-1 Hardener 

Protecto-Glass 960

Trowel applied, reinforced, novolac, vinyl ester lining & floor topping, 90 MILS (2.3 mm).

Protecto-Glass 960 Basecoat
Protecto-Glass 960 Topcoat
Primer 27
G-1 Filler
1 Ounce Mat
PH-1 Hardener 

Protecto-Glass 965

Trowel applied, reinforced, carbon filled, novolac vinyl ester lining & floor topping, 90 MILS (2.3 mm).

Protecto-Glass 965 Basecoat
Protecto-Glass 965 Topcoat
Primer 27
G-1 Filler
1 Ounce Mat
PH-1 Hardener

Protecto-Line 100XT

Trowel-applied, 100% solids, reinforced novolac epoxy lining & floor topping 1/8” (3.17 mm).

Protecto-Line 100XT COMP A
Protecto-Line 100XT COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
10 Ounce Woven Roving
S-30 Smoothing Liquid

Protecto-Line 100XT AR

Trowel-applied, 100% solids, reinforced novolac epoxy lining & floor topping 1/8” (3.17 mm).

Protecto-Line 100XT AR COMP A
Protecto-Line 100XT AR COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
AR Filler
10 Ounce Woven Roving
S-30 Smoothing Liquid

Protecto-Line 800

Trowel-applied, reinforced, vinyl ester lining and floor topping 1/8” (3.17 mm).

Protecto-Line 800
Primer 27
G-1 Filler
10 Ounce Woven Roving
PH-1 Hardener
S-30 Smoothing Liquid

Protecto-Line 800AR

Trowel-applied, reinforced, vinyl ester lining and floor topping 1/8” (3.17 mm).

Protecto-Line 800 AR
Primer 27
G-1 Filler
AR Filler
10 Ounce Woven Roving
PH-1 Hardener
S-30 Smoothing Liquid 

Protecto-Line 805

Trowel-applied, reinforced, vinyl ester lining and floor topping 1/8” (3.17 mm).

Protecto-Line 805
Primer 27
G-9 Filler
Synthetic Roving
PH-1 Hardener
S-30 Smoothing Liquid

Protecto-Line 900

Trowel-applied, reinforced, novolac vinyl ester lining and floor topping, 1/8” (3.17 mm).

Protecto-Line 900
Primer 27
G-1 Filler
10 Ounce Woven Roving
PH-1 Hardener
S-30 Smoothing Liquid 

Protecto-Line 900AR

Trowel-applied, reinforced, novolac vinyl ester lining and floor topping, 1/8” (3.17 mm).

Protecto-Line 900 AR
Primer 27
G-1 Filler
AR Filler
10 Ounce Woven Roving
PH-1 Hardener
S-30 Smoothing Liquid 

Protecto-Line 905

Trowel-applied, reinforced, novolac vinyl ester lining and floor topping, 1/8” (3.17 mm).

Protecto-Line 905
Primer 27
G-9 Filler
Synthetic Roving
PH-1 Hardener
S-30 Smoothing Liquid 

Sealer 25

Two component, aliphatic polyurethane sealer.

Sealer 25 COMP A
Sealer 25 COMP B
Primer 67 COMP A
Primer 67 COMP B

Sealer 30

High solids, two component, aliphatic, polyurethane sealer 4-6 MILS.

Sealer 30 COMP A
Sealer 30 COMP B
Primer 67 COMP A
Primer 67 COMP B

Sealer 30SD

Two‑component, aliphatic, static dissipative polyurethane sealer.

Sealer 30SD COMP A
Sealer 30SD COMP B
Primer 67 COMP A
Primer 67 COMP B 

Sealer 67

High solids, moisture-tolerant epoxy sealer for concrete 3-4 MILS (0.1 mm).

Sealer 67 COMP A
Sealer 67 COMP B
Primer 67 COMP A
Primer 67 COMP B 

S-10 Solvent

Cleaning solvent for tools and equipment.

S-10 Solvent

Scratch-Coat 300

Trowel or squeegee applied, epoxy material for concrete.

Scratch-Coat 300 COMP A
Scratch-Coat 300 COMP B 

Scratch-Coat 800

Trowel or squeegee applied, epoxy material for concrete.

Scratch-Coat 800
Primer 27
G-2 Filler
PH-1 Hardener 

Scratch-Coat Block Filler 300

An epoxy based material for filling surface defects and bugholes in concrete substrates.

Scratch-Coat Block Filler 300 COMP A
Scratch-Coat Block Filler 300 COMP B

Shock-Crete HD

Trowel applied water dispersed polyurethane floor topping 1/4″ – 3/8” (6mm – 10mm).

Shock-Crete HD COMP A
Shock-Crete HD COMP B
Shock-Crete Filler- HD AGG

Shock-Crete SL/SF Series

Semi-Self Leveling or Seeded Water Dispersed Polyurethane Floor Topping, 1/16”-3/16” (1.6mm-4.8mm).

Shock-Crete SL COMP A
Shock-Crete SL COMP B
Shock-Crete SL-AGG
Shock-Crete Topcoat COMP A
Shock-Crete Topcoat COMP B
Shock-Crete Topcoat Filler

Shock-Crete Vertical

Trowel applied water dispersed polyurethane wall lining, 3/16” (4.8mm).

Shock-Crete Vertical COMP A
Shock-Crete Vertical COMP B
Shock-Crete Filler-AGG Vertical
Primer 67 COMP A
Primer 67 COMP B

Shock-Crete MD

Semi-Self Leveling Water Dispersed Polyurethane Floor Topping, 3/16”-1/4”.

Shock-Crete MD COMP A
Shock-Crete MD COMP B
Shock-Crete Filler-MD AGG

Shock-Crete MD/SF

Semi-Self Leveling or Seeded Water Dispersed Polyurethane Floor Topping, 3/16”-1/4”.

Shock-Crete MD COMP A
Shock-Crete MD COMP B
Shock-Crete Topcoat COMP A
Shock-Crete Topcoat COMP B
Shock-Crete Topcoat Filler

Steri-Coat P

100% solids, multi-functional, pigmented high build epoxy novolac coating, for floor & wall application 10-15 MILS (.2mm).

Steri-Coat P COMP A
Steri-Coat P COMP B
Primer 67 COMP A
Primer 67 COMP B

Steri-Coat 400

MMA, Acrylic fast cure flooring, 20 mils.

Steri-Coat 400
Primer 47
MH-1 Hardener

Steri-Cove Gel

An epoxy system designed for installation as integral cove base at 1/16” to ¼” thick.

Steri-Cove Gel COMP A
Steri-Cove Gel COMP B

Steri-Crete SL

Semi-self leveling water dispersed polyurethane floor topping, 1/16″-3/16″ (1.6mm-4.8mm).

Steri-Crete SL COMP A
Steri-Crete SL COMP B
Steri-Crete SL Topcoat COMP A
Steri-Crete SL Topcoat COMP B
Steri-Crete SL Aggregate

Steri-Flake

Solvent free, light to medium traffic, decorative acrylic flake filled floor system.

Steri-Flake Bodycoat COMP A
Steri-Flake Bodycoat COMP B
Steri-Flake Topcoat Clear COMP A
Steri-Flake Topcoat Clear COMP B
Primer 67 COMP A
Primer 67 COMP B

Steri-Flake 400

MMA (Methyl methacrylate), light-medium traffic, decorative acrylic flake filled floor system.

Steri-Flake 400 Topcoat
Steri-Flake 400 Basecoat
Primer 47
MH-1 Hardener

Steri-Flex

A flexible, crack-bridging epoxy lining consisting of a 1/16” trowel applied basecoat, one layer of saturated fiberglass mat reinforcement, 15-30 mils of chemical resistant epoxy topcoat.

Steri-Flex BC COMP A
Steri-Flex BC COMP B
Steri-Seal HB COMP A
Steri-Seal HB COMP B
Primer 67 COMP A
Primer 67 COMP B
G-1 Filler
1 Ounce Mat 

Steri-Flor B

Solvent free, medium-heavy traffic industrial floor 1/16” – 3/16” (1.6 mm – 4.8 mm).

Steri-Flor B COMP A
Steri-Flor B COMP B
Primer 67 COMP A
Primer 67 COMP B
Broadcast Sand

Steri-Flor Q

Solvent-free, heavy duty decorative quartz flooring 1/4″ (6.2mm).

Steri-Flor Q Bodycoat COMP A
Steri-Flor Q Bodycoat COMP B
Steri-Flor Q Topcoat Pigmented COMP A
Steri-Flor Q Topcoat Pigmented COMP B
Steri-Flor Q Topcoat Clear COMP A
Steri-Flor Q Topcoat Clear COMP B
Steri-Flor Q Sealer Pigmented COMP A
Steri-Flor Q Sealer Pigmented COMP B
Steri-Flor Q Sealer Clear COMP A
Steri-Flor Q Sealer Clear COMP B
Steri-Quartz AGG Sand
EA-1 Filler

Steri-Flor SL

100% Solids, multi-functional, semi-self leveling epoxy floor topping 20-25 MILS (.51-.58 mm).

Steri-Flor SL COMP A
Steri-Flor SL COMP B
Primer 67 COMP A
Primer 67 COMP B

Steri-Flor T

Hybrid epoxy, heavy duty industrial floor system 1/8 – 1/4″ (4.8mm).

Steri-Flor T COMP A
Steri-Flor T COMP B
Primer 67 COMP A
Primer 67 COMP B
EA-1 Filler

Steri-Flor TN

Hybrid novolac epoxy – heavy duty industrial floor system 1/4″ (4.8mm)

Steri-Flor TN Basecoat COMP A
Steri-Flor TN Basecoat COMP B
Steri-Flor TN Topcoat COMP A
Steri-Flor TN Topcoat COMP B
Primer 67 COMP A
Primer 67 COMP B
EA-1 Filler

Steri-Glass

100% solids, fiberglass reinforced, high build epoxy wall system 25-35 MILS (.5-.9 mm).

Steri-Glass BC COMP A
Steri-Glass BC COMP B
Steri-Glass TC COMP A
Steri-Glass TC COMP B
Steri-Glass Mesh
Primer 67 COMP A
Primer 67 COMP B

Steri-Quartz B

Solvent free, light-medium traffic, decorative quartz floor system 1/16” (1.6 mm).

Steri-Quartz B COMP A
Steri-Quartz B COMP B
Primer 67 COMP A
Primer 67 COMP B
Steri-Quartz AGG Sand

Steri-Quartz T

Solvent free, light-medium traffic decorative quartz floor system 3/16” (4.8 mm).

Steri-Quartz T COMP A
Steri-Quartz T COMP B
Primer 67 COMP A
Primer 67 COMP B
Steri-Quartz AGG Sand

Steri-Seal HB

100% solids, multi-functional, spray applied pigmented high build chemically resistant epoxy coating, for floor, ceiling & wall applications 30-40 MIL thickness.

Steri-Seal HB COMP A
Steri-Seal HB COMP B
Primer 67 COMP A
Primer 67 COMP B

Steri-Seal HC

100% solids, multi-functional, pigmented high chemically resistant epoxy coating, for floor, ceiling & wall applications 10-20 MIL thickness.

Steri-Seal HC Part A
Steri-Seal HC Part B
Primer 67 COMP A
Primer 67 COMP B

Steri-Soft

Solvent free, light to medium traffic, decorative rubberized resilient floor system 3/16″ (4.8mm).

Steri-Soft Bodycoat Part A
Steri-Soft Bodycoat Part B

Steri-Soft Flake

Urethane, light-medium traffic decorative flexible resilient floor system 1/8”-3/16”.

Steri-Soft Flake Bodycoat COMP A
Steri-Soft Flake Bodycoat COMP B
Steri-Soft Flake Grout COMP A
Steri-Soft Flake Grout COMP B

Styrene

Smoothing liquid for Protecto-Flake 800 and Protecto-Flake 900.

Styrene